H&C Concrete

Obsidian Semi Transparent Stain

This project used Obsidian Semi Transparent Stain diluted down with water to match a more Tumbled Stone look (please refer to color card/pdf of the site).  Then sealed with a solvent-based clear coat.  This project shows the flexibility our Semi Transparent Decorative Stain line has - you create your own colors and look. 

Featured product used: H&C® Semi Transparent Decorative Stains

Texas Star

Using various waterbased stains and Infusion Acid Stain, this Texas star was scored into the concrete inside a model home outside of San Antonio, TX.  Colors vary in dilution from Crumbled Brick and Black Coffee, as well as H&C Concrete Stain Solid Color Water-based.

Featured product used: H&C® Infusion™ Reactive Acid Stains

Semi Transparent Decorative Stain

 A combination of Henna and Autumn Breeze Semi Transparent Decorative Stain was used on this pad, along with the Color Packs Copper Penny for the bottom first coat (the lines), and Brushed Steel for the top coat.  Semi Transparent Stain diluted 1:1 with water, sealed with Wet Look Concrete Sealer.

Featured product used: H&C® Semi Transparent Decorative Stains

Compass scored into patio, stained with Semi Transparent Stain

This patio was stained with Semi Transparent Tumbled Stone not diluted with water at all.

Featured product used: H&C® Semi Transparent Decorative Stains

Interior Floor, Kitchen with imperfections

This kitchen floor was stained with Infusion™ Black Coffee, sprayed on 2-3 coats with a conical spray tip. 

*Note the accentuated imperfections in the bottom middle of the picture; a good example of how glue, tape or any contaminant affects the final appearance. 

Featured product used: H&C® Infusion™ Reactive Acid Stains

Infusion™ Acid stained walkway

Walkway using multiple colors of Infusion™ diluted to varying degrees.  Used also water-based stains to lighter colors. 

(Cobblestone stencil and scoring done by professionals at time of installation). 

Featured product used: H&C® Infusion™ Reactive Acid Stains

Semi Transparent Stain Henna

This project used Semi Transparent Stain, Henna, diluted 2:1 with water.  All Semi Transparent staining projects must be sealed with a clear coat: water-based or solvent-based - it doesn't matter, as long as it's sealed. 

Featured product used: H&C® Semi Transparent Decorative Stains

Acid Stained Wine Bar

Infusion™ acid stained wine bar using Black Coffee HC 402. 

*Note the cracks in the concrete which are accentuated with the acid staining. (Chairs should have scuff inhibitors on the feet).

Featured product used: H&C® Infusion™ Reactive Acid Stains

Finished Pool

This pool was sprayed with the H&C Resurfacer Heavy Traffic product, then rolled with H&C® Concrete Stain Solid Color Water-Based stain in Sandstone color.

Featured product used: H&C® Concrete Stain Solid Color Water-based

Infusion™ Acid stained living room.

This room is stained with Black Coffee, HC 402, 2-3 coats of stain applied with a conical sprayer, then finished with one coat of solvent-based clear sealer and Industrial Floor Finish to make the color "pop" and become more vibrant.   

Featured product used: H&C® Infusion™ Reactive Acid Stains

Infusion™ Acid stained Driveway

This driveway was coated with a very light, diluted spray of Crumbled Brick, HC 403.  The accent line has a thicker coat of Rusted Fence, HC401, brushed on. 

Featured product used: H&C® Infusion™ Reactive Acid Stains

Shield-Crete® on metal stairs

Here is an example of Shield-Crete® Epoxy applied to metal stairs at a manufacturing facility.  This shows the broad spectrum of projects this product can be applied, garage floors are just the beginning!  

Featured product used: H&C® Shield-Crete® Epoxy Concrete Garage Floor Coating

Shield-Crete® Epoxy on interior floor

Here is an example of Shield-Crete® Epoxy applied to a meeting room in a commercial building/warehouse.  The color used was Pewter, with one coat of Shield-Crete® Glaze for added gloss.

Featured product used: H&C® Shield-Crete® Epoxy Concrete Garage Floor Coating

Garage Floor with Jeep

Finished Shield-Crete® Epoxy garage floor. Color used was beige with a "normal" flake coverage and Shield-Crete® Glaze on top for added durability and shine.

Featured product used: H&C® Shield-Crete® Epoxy Concrete Garage Floor Coating

H&C Logo - Step 1

This creative contractor used Dahlia Red and Cardinal Red combined at full strength for the ribbon, and 3 coats of Gold Leaf Semi Transparent Decorative Stain "straight" (not diluted at all) for the shield in the H&C® logo.

Featured product used: H&C® Semi Transparent Decorative Stains

H&C Logo - Step 2

Step 2 of this project included scoring out the details/engraving.  Obsidian Semi Transparent Stain was used on the H and C brushed on at a thick rate, not diluted at all. 

Featured product used: H&C® Semi Transparent Decorative Stains

H&C Logo - Finished

This logo was completed with H&C® Semi Transparent Decorative Stain, Cocoa Bean and Blue Pearl layered. 

Featured product used: H&C® Semi Transparent Decorative Stains

Shield-Crete® Beige 3-car

This is a 3-car garage with Shield-Crete® Epoxy with beige, heavy flakes applied. 

**Note the stem wall is not coated (the vertical area masonry block wall between the floor and where the dry wall begins).  You can use Shield-Crete for that area, or H & C's  Basement & Masonry Waterproofing Sealer. 

Featured product used: H&C® Shield-Crete® Epoxy Concrete Garage Floor Coating

4 Colors of Shield-Crete®

This is a Parade of Homes model garage floor that displayed all 4 color options of Shield-Crete® Epoxy. 

Featured product used: H&C® Shield-Crete® Epoxy Concrete Garage Floor Coating

Shield-Crete® Epoxy, beige close up

Here is a close-up of the Shield-Crete® Epoxy in beige.  This is a medium flake coverage with the beige/ivory flake blend.  If you prefer heavier flakes, extra Deco-Flakes are available.   Extra flakes will add a bit of extra skid resistance, but if you opt for the Glaze, put the non-skid additive from the kit into the Glaze. 

**Putting the non-skid additive into the epoxy then applying flakes and the Glaze will render the original additive in the epoxy virtually useless. 

Featured product used: H&C® Shield-Crete® Epoxy Concrete Garage Floor Coating

Wet Look Applied to Pool deck

This pool deck in Florida was applied with the Concrete Sealer Wet Look Water-based.

Driveway Stained with H&C® Conrete Sealer Solid Color Solvent-based

This driveway was stained with H&C® Concrete Stain Solid Color Solvent-based.  The color is our most popular, Bombay, 2 coats applied. 

Featured product used: H&C® Concrete Sealer Solid Color Solvent Based

Driveway of a Hilton Hotel

This hotel driveway was sealed with H&C® Concrete Sealer Solid Color Solvent-based, Tile Red. 

Featured product used: H&C® Concrete Sealer Solid Color Solvent Based

Pavered Pool Deck in Florida

H&C® Paver Sealer Natural was applied to this pool deck.  The joint sand between the pavers is now locked in while maintaining the natural matte finish of the pavers.   

Pavered Patio with Gloss applied

This pavered patio in Ohio has one base coat of Paver Sealer Natural to lock in the joint sand, and a second coat of Paver Sealer Gloss for an added sheen. 

Finished Driveway

This driveway was sealed with 2 coats of H&C® Concrete Sealer Solid Color Solvent-based, in Bombay. 

Featured product used: H&C® Concrete Sealer Solid Color Solvent Based

Firepit Patio with Knockdown and Concrete Stain Solid Color Water-based

This patio was coated with H&C® Resurfacer Knockdown Texture, then stained with Concrete Stain Solid Color Water-based, in Sandstone. 

Featured product used: H&C® Concrete Stain Solid Color Water-based

Bridge with Concrete Stain Solid Color Water-based

This bridge in New Jersey was stained with H&C® Concrete Stain Solid Color Water-based. Colors used are Concord Grapevine (HC 163), Sunset Terrain (HC 169), Red Terrazzo Tile (HC 102), and Olive Wood (HC 173).    

Featured product used: H&C® Concrete Stain Solid Color Water-based

Resurfacer/Knockdown hopper gun

This contractor is practicing using a hopper gun to apply the Resurfacer Heavy Traffic texture.  It is recommended to practice how the gun will splatter onto sample boards.  It is equally important to be sure it doesn't clog and splatter unevenly. 

Resurfacer/Knockdown Texture before and After

This shows the Resurfacer Instant Texture product before it's "knocked down" with a trowel. 

Knocking the Resurfacer down

This contractor is "knocking down" the Resurfacer after it's been sprayed on with the hopper gun.  When the Resurfacer is splattered onto a surface, it has peaks and valleys that need to be smoothed over, or "knocked down" with a rounded edged trowel. 

*Note the spiked shoes he's wearing so not to damage the coating.

Rolling Stain onto Resurfacer

This is gives you an idea what the Resurfacer product looks like while it's being stained.  The Resurfacer was applied with a hopper gun, knocked down with a trowel, allowed to dry, then H&C's Concrete Sealer Solid Color Water-based was simply rolled over it.  The color used here was Sandstone. 

Featured product used: H&C® Concrete Stain Solid Color Water-based

Spraying acid stain onto outdoor patio.

Spraying of first coat of Infusion™ onto a patio. 

*Note the masked off areas to avoid overspray as well as the cardboard to keep from spray onto foliage.  Color of stain is not known, however after another coat, the reaction, neutralization and a clear topcoat this color will deepen and appear differently anyway.

Featured product used: H&C® Infusion™ Reactive Acid Stains

Applying Paver Sealer Gloss to a patio

This is how the Paver Sealer Gloss will look as it's being applied.  The milky white color will dry to a glossy shine in about an hour, this makes for ease of application. 

Etching Solution reacting to concrete

This is how Etching Solution will look when reacting with the concrete to open the pores, making for good adhesion of a stain or sealer. 

Basement & Masonry Waterproofing

Simple surface prep and a roller cover and frame are all you need to turn your basement walls from drab to sealed bright walls!  Apply right out of the bucket or tint it up to 2 ounces per gallon for a pastel color you might desire.  This coating stands up to 10 psi of water pressure when applied correctly. 

Color Pack Base Coat Application

This is the base coat of a Resurfacer application.  The first step is to pour and trowel down the Color Pack/Resurfacer, here the Bamboo color pack is added to the Resurfacer.

Garage floor prep.

Scrub the floor of the garage, especially where the tires are going to sit to ensure the surface is porous.  Using a stiff broom brush, scrub in the cleaning/degreasing mixture, and hose down the garage floor thoroughly until no bubbles appear.

Featured product used: H&C® Shield-Crete® Epoxy Concrete Garage Floor Coating

Creating the pattern or "stamped" look.

Here we are taping off the cured first coat Resurfacer Bamboo.  Be sure to leave extra long ends of the tape to be pulled off later when the topcoat cures, typically overnight. 

Color Pack Birch Bark over Bamboo

Here the same project has the second coat of Resurfacer applied with the Color Pack Birch Bark. The tape previously applied has been taken off to expose the Bamboo base coat, or the lines. 

Semi Transparent Decorative Stain application

Here 3 colors are randomly sprayed onto the surface:  Meadow Green, Henna and Autumn Breeze blending together to form a unique color combination among all the peaks and valleys of the Resurfacer/Color Pack trowel finish. 

Featured product used: H&C® Semi Transparent Decorative Stains

Pavers sealed with Paver Sealer Solvent-based

These pavers were sealed with Paver Sealer Solvent-Based. 

Driveway Before

Worn driveway before H&C products were used.

Driveway After, Semi-Transparent Decorative Stains

Driveway finished with a variety of H&C Semi-Transparent Decorative Stain colors. Sealed with H&C Concrete Sealer Solvent-Based Clear Gloss.

Featured product used: H&C® Semi Transparent Decorative Stains

Front Steps, Semi-Transparent Decorative Stain

Front steps finished using H&C Semi-Transparent Decorative Stain. Obsidian was diluted 1:1 with water. Sealed with H&C Concrete Sealer Wet Look Water-Based.

Featured product used: H&C® Semi Transparent Decorative Stains

Living Room, Semi-Transparent Decorative Stains

Living Room finished using a variety of H&C Semi-Transparent Decorative Stains.  Diluted 1:1 with water and sealed with H&C Concrete Sealer Wet Look Water-Based.

Featured product used: H&C® Semi Transparent Decorative Stains

Kitchen, High Performance Industrial Clear Coat

Kitchen floor finished with 2 coats of H&C High Performance Industrial Clear Coat.

Featured product used: H&C® High Performance Industrial Clear Coat

Broom Finish Repair

Concrete repaired with H&C resurfacer, Broom Finish Repair giving it the appearance of freshly placed and broomed concrete.

Featured product used: H&C® Broom Finish Repair

Quick Patch & Repair

Concrete void repaired with H&C Quick Patch & Repair. 

Featured product used: H&C® Quick Patch & Repair

Concrete Resurfacer, Dual Component Texture

This decorative concrete floor was resurfaced with H&C Dual Component Texture - a color pack was added to the bagged good. H&C Acetone Dye Stain Reno Gold was brush applied. It was then sealed with two coats of H&C High Performance Industrial Clear Coat.

Featured product used: H&C® Dual Component Texture

Condo, Solid Color Solvent-Based Sealer

The hallways and walkways of this condo were finished with 2 coats of H&C Solid Color Solvent-Based Sealer.

Featured product used: H&C® Concrete Sealer Solid Color Solvent Based

Stamped Concrete, Dry-Shake Color Hardener

This freshly placed concrete was colored with H&C Dry-Shake Color Hardener. The hardener was broadcast and floated into the new concrete. FOR PROFESSIONAL USE ONLY.

Featured product used: H&C® Dry-Shake Color Hardener

Stamped Concrete, Dry-Shake Color Release

The freshly placed concrete was then stamped, using H&C Dry-Shake Color Release to help release stamping tools, and provide a secondary accent color to the Dry-Shake Color Hardener.  FOR PROFESSIONAL USE ONLY.

Featured product used: H&C® Dry-Shake Color Release

Finished Stamped Concrete, Dry-Shake Color Hardener & Release

Finished stamped concrete application, colored with H&C Dry-Shake Color Hardener and H&C Dry-Shake Color Release.  Sealed with H&C Low VOC Concrete Sealer Clear Gloss Solvent-Based.  FOR PROFESSIONAL USE ONLY.

Featured product used: H&C® Dry-Shake Color Hardener

Application of Stampable Overlay & Liquid Release

This existing slab was resurfaced with H&C Stampable Overlay and Liquid Release. FOR PROFESSIONAL USE ONLY.

Featured product used: H&C® Stampable Overlay

Finished Stampable Overlay & Liquid Release

The old slab was resurfaced with H&C Stampable Overlay and Liquid Release. H&C Semi-Transparent Stains were used to add color.  The decorative floor was sealed with H&C Concrete Sealer Solvent-Based Clear Gloss.

Featured product used: H&C® Stampable Overlay

Parking Garage, Concrete Stain Solid-Color Water-Based

The walls and ceiling of this parking garage were finished with H&C Solid Color Water-Based Stain.

Featured product used: H&C® Concrete Stain Solid Color Water-based

Walkway, Broom Finish Repair

This walkway was resurfaced using H&C Broom Finish Repair.  Perfect for high traffic areas,  and a cost effective alternative to replacement.

Featured product used: H&C® Broom Finish Repair

Fish in Dahlia Red

H&C® Semi Transparent Stain Dahlia Red was used on the background of this fish.  Dahlia Red was used at full strength.  To achieve this look, a drimmel bit was used to score out the pattern in the texture. 

Featured product used: H&C® Semi Transparent Decorative Stains

Butterfly in H&C Semi-Transparent Stains

H&C Dual Component Texture was used with Cemented Deal Color Pack added.  A variety of Semi-Transparent stains were used.

Featured product used: H&C® Semi Transparent Decorative Stains

Paver Sealer Driveway

This driveway was sealed using H&C Solvent-Based Paver Sealer. 

Featured product used: H&C® Paver Sealer Solvent-based

Shield-Crete® - 4 new colors

This sample is showing H&C newest Shield-Crete Epoxy Colors - Night Sky, Saftey Yellow, Jade Green, Royal Blue. 

Featured product used: H&C® Shield-Crete® Epoxy Concrete Garage Floor Coating