H&C® Dry-Shake Color Release
H&C Dry-Shake Color Release is used with H&C Dry-Shake Color Hardener for stamping newly or freshly placed concrete. It releases stamping tools from concrete and provides a secondary accent color with its proprietary integrated pigments.
Where to Use
STAMPED CONCRETE APPLICATIONS SUCH AS:
Driveways
Garage Floors
Patios
Lanais
Walkways
Pool Decks
Commercial Applications
Key Advantages
H&C Dry-Shake Color Release is designed to work with stamping tools to enhance the texture and provide an accent color in any hardscape. Dry-Shake Color Release is available in 5 packaged colors and 5 special order colors.
-
Product Supplies
- Masonry Brush
- Texture Mats
- Tampers
- Touch-up Wheel
- Chisel
-
Product Preparation
H&C Dry-Shake Color Release is used on freshly placed concrete. -
Product Application
***Please refer to the Product Data Page for full Product Application information.
FOR PROFESSIONAL USE ONLY.
H&C Dry-Shake Color Release is broadcasted across concrete that is ready to be stamped. Prior to application be sure all areas that do not need release are sufficiently masked. With a mason brush, apply enough H&C Dry-Shake Color Release to stay just ahead of stamping tools that are to be placed or set. DO NOT trowel H&C Dry-Shake Color Release. As concrete cures sufficiently, sweep up the excess powder. Allow the final release color to stand overnight.
Clean Up
Final clean up requires water and mixture of H&C Cleaner Degreaser 1-part to 3-parts water. Be careful not to rinse or brush out all remaining color.
Use H&C Cleaner Degreaser and water mixture to clean stamping tools and surrounding areas. A stiff brush may be needed to remove final release from tools.
